TruStrap™ System

TruStrap™ is an impact screen finish designed to replace the process of lacing paracord or bungee cords through grommets and carabiners.

The system uses:

• 1-inch reinforced webbing
• A toothed alligator-style cinch clip
• Attachment points integrated directly into the screen during manufacturing

Instead of threading the cord through multiple grommets and anchor points, installers simply:

• Route the strap to the frame
• Pull to tension (auto-locks)
• Press the release tab to loosen or adjust

No re-lacing. No incremental tightening. No back-and-forth adjustments.

The installer problem that led to TruStrap™

We observed installers mounting screens using a common method:

• Paracord running through grommets
• Cord routed up through carabiners attached to the frame
• A shoelace-style tightening process where one section is tightened, then the entire run must be tightened again, and height or tension changes require repeating the process

This approach:

• Takes significant time
• Requires multiple passes
• Is difficult with small crews
• Slows down commercial installs
• Increases labor cost per job

For installers, time is money.

The TruStrap™ solution

TruStrap™ replaces cord-based lacing with a single-pull, single-release tensioning system.

How it works

• Webbing feeds through a toothed alligator cinch clip
• Pulling the strap tight automatically locks the tension
• The clip’s teeth grip the webbing under load
• To loosen or adjust: press the release tab, slide the strap freely, and re-tension instantly

This lets installers set and adjust screen height and tension without re-lacing.

Residential screen replacement advantage

In residential simulator systems, screen wear is normal over time. When a replacement screen is required, traditional paracord or bungee systems often force installers to return onsite to reinstall the screen themselves.

With TruStrap™, replacement screens become customer-installable, because the system:

• Does not require lacing
• Uses intuitive pull-to-tighten straps
• Can be adjusted without tools
• Is easy to understand visually

Installers can:

• Ship a replacement screen
• Send a short how-to video
• Allow the customer to complete the install themselves

This turns screen replacement from a service call into a simple shipment, saving time, travel, and labor costs.

Key benefits

• Simpler installation, with no lacing
• One-handed tensioning
• Instant height and tension adjustments
• No re-threading or re-lacing
• Consistent, repeatable results
• Cleaner, more professional appearance
• Ideal for small crews and tight timelines

Why this matters for installers

• Fewer return visits
• Lower long-term service costs
• Better margins on residential jobs
• Easier customer service
• Ability to support customers remotely
• Easier scalability across wider geographic areas

Why this matters for customers

• Easier screen replacement
• No waiting for installer availability
• Simple, guided installation
• Confidence adjusting tension themselves

Where TruStrap™ is best used

• Commercial golf simulator installs
• Multi-bay facilities
• Installer-built enclosures
• Residential systems where service efficiency matters
• Projects with limited crew size
• Situations requiring frequent adjustment

TruStrap™ vs traditional paracord systems

Available as

• Optional finish on TruSim Systems impact screens
• Integrated during manufacturing
• Can be specified per screen edge or perimeter

Why TruSim Systems built TruStrap™

TruStrap™ was not designed in isolation — it was developed by watching installers work on real job sites. We asked a simple question: how do we give installers their time back? The answer was to remove re-lacing entirely.

This aligns with TruSim Systems’ core philosophy: engineer finishes that reduce labor, not just look good on paper.

Positioning within impact screen finishes

TruStrap™ is part of TruSim Systems’ engineered finish lineup:

• Grommets — legacy, basic option
• TruGrom™ — clean perimeter, even tension, sewn-in loop system
• TruStrap™ — adjustable, service-call reducing solution

Each finish is purpose-built — TruStrap™ is the installer efficiency solution.