Products
34 products across 6 layers, from the frame to the floor. Every part is sized to the same 600 mm panel, so the layers fit each other without cutting on site.
Screens & backers
The surface the ball hits, the layers behind it that stop it, and the systems that hold the screen tight to the frame.
Impact screens
Custom impact screens
Built to your exact width and height, finished with grommets, hook-and-loop or a bottom pocket. Seamless up to 10 ft tall; taller screens have a seam.
Details →
High Contrast Elite Triple Layer Impact Screen
A silver-gray front that holds contrast in rooms with ambient light, an energy-absorbing core and a reinforced rear safety layer.
Details →
Elite Golf Simulator Impact Screen
A fully finished, custom-built impact screen in any width and height, seamless up to 10 ft tall, cut, sewn and finished in-house.
Details →
Superior Knit Impact Screen, 126 in wide
Single-layer heavy-knit polyester screen with a 126 in knitting width, for wide bays with fewer seams.
Details →Impact screen fabric by the roll
Screen fabric on the roll for converters and installers who make their own.
Details →Backers
Mounting
TruStrap™ System
1 in webbing and an auto-locking alligator cinch clip, built into the screen edge. Pull to tension, press to release, no re-lacing.
Details →
TruGrom™ System
Hard plastic loops sewn into reinforced webbing around the screen perimeter, for even tension without punched metal grommets.
Details →
TruGrip™ XL Hook
2 in wide black double-sided hook that holds padded bumpers to the loop on a screen edge and comes off by hand for service.
Elite Frame Impact Screen
The Elite screen finished with a black carpeted felt picture frame on hook and loop. No exposed hardware.
Details →
Black ball bungee, 6 in
6 in black ball bungee with a 1 in molded ball, for tensioning screens, backers and overhead mesh.
Ridged ball bungee, 8 in, 50 pack
Longer 8 in ridged single-ball bungees, 50 to a pack, for wider gaps between the screen or mesh and the frame.
Acoustic panels
Acoustic wall panels
600 × 600 and 600 × 300 mm panels that bolt to the frame, four fixings each. Never cut on site.
Hook-mount acoustic wall panels, 2 × 2 and 2 × 4 ft
PU foam on a rigid PVC backer, wrapped in ballistic nylon. Mounts on 3M adhesive hook with no brad nails or fasteners.
Details →
Felt Wall & Ceiling Panel, 4 × 6 ft
A 650 GSM felt face on a 10 mm EVA foam core with a peel-away adhesive back. Each sheet covers 24 sq ft and trims with a utility knife.
Drapes & fillers
Performance drapes
Velour, velvet and performance polyester drapes in 15 and 22 oz, cut and sewn in-house. They quiet the bay, block stray light and finish the room.
Details →Gap fillers
Close the gaps between the screen and the walls so nothing gets past the edge.
Details →Materials
Polyester felt
Black 5 mm, 650 GSM needle-punch felt on a 60 in roll. It behaves like loop, so hook fasteners grip it directly.
Details →
3M™ adhesive-backed hook, 2 in
2 in hook with factory-applied 3M pressure-sensitive adhesive, for mounting panels and padding without drilling.
Extra-tacky rubber adhesive hook and loop
Hook and loop with an extra-tacky rubber adhesive back, for holding bumpers, padding and panels to walls and frames. 1.5 in hook, 1.5 in loop, and 4 in.
Containment
Panels
Subfloor
Interlocking gym tile, 2 × 2 ft
Black 2 × 2 ft interlocking EVA tiles that make the subfloor. ¾ in tiles come 25 to a box (100 sq ft); 1 in tiles come 20 to a box (80 sq ft).
EVA subfloor sheets, 4 × 6 ft, ½ in
Black ½ in EVA foam sheets, 4 × 6 ft, sold in packs of 10, for a continuous floor underlay with fewer seams than tile.
Turf & mat
Frame padding
Foam covers for exposed metal. Panels absorb a ball; aluminum sends it back at the golfer.
Bumpers
TruRamp
TruRamp™ for LT
600 × 600 mm black EVA tiles laid along the screen base. They rise from 19 mm at the floor tile to 51 mm at the screen, so a low shot hits foam, not the bottom rail.
TruRamp™ for XT
The same 600 × 600 mm tile, rising to 102 mm to cover the XT truss.
Enclosure
The LT and XT frames, the equipment boom and the hardware that holds the bay together.
Frames
LT System
2 in round aluminum tube. Residential and light commercial.
Details →
XT System
100 mm square aluminum truss for commercial venues and multi-bay rows.
Details →Extendable equipment boom
Runs front to back on top of the cage, clamped to the crossbars above the panel plane, and telescopes out past the frame. Carries the projector and launch monitor clear of the ball. One boom fits both LT and XT.
Details →Hardware
Unless a product page says otherwise, these products have not been tested for PFAS.